Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrument
Item number 82-M-830-LS

Monocular and Loupe with Near Focus, Specwell M-830-LS, 25x

3.859 SEK

In stock
Request a quote 82-M-830-LS

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: ,

Other models in the series 8

Description

Specwell M-830-LS Monocular with auxiliary near-focus lens and short acrylic base. Can be used either as a stand-mounted near-view microscope or as a long-distance loupe telescope. Popular for industrial applications in quality control and inspection.

When using this loupe as a telescope, objects can be viewed at a minimum working distance of 600 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 12 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular objects. The image is not inverted. Both lens systems (eyepiece and objective lens) are achromatic and feature anti-reflective coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true image, and magnification factor, it is also an excellent visual aid. Practical applications include use as a loupe, telescope, reading aid, or for direct quality control. A high-quality case with a neck strap is included.

Alternative model M-830-KS is the same loupe with a short acrylic base that offers higher magnification when used as a stand-mounted microscope.

Magnification 8x (monocular)
distance 600 mm = 13.5x
25x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 600 mm (loupe)
66 mm (loupe)
Field of view, loupe Distance 1000 meters = 149 meters
Distance 600 mm = 72 mm
Field of view near-focus lens 12 mm (loupe, LS)
Size 130 x 42 mm (magnifier)
213 x 45 mm (magnifier LS)
Weight 170 grams (monocular)
228 grams (magnifier)
Leather case included
Display Upright image
Lens opening 30 mm
Field of view 8.5 °
Relative brightness 14
Exit pupil diameter 3.75 mm
Additional information
Product Type

Magnification Range

Specification

Specwell M-830-LS Monocular with auxiliary near-focus lens and short acrylic base. Can be used either as a stand-mounted near-view microscope or as a long-distance loupe telescope. Popular for industrial applications in quality control and inspection.

When using this loupe as a telescope, objects can be viewed at a minimum working distance of 600 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 12 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular objects. The image is not inverted. Both lens systems (eyepiece and objective lens) are achromatic and feature anti-reflective coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true image, and magnification factor, it is also an excellent visual aid. Practical applications include use as a loupe, telescope, reading aid, or for direct quality control. A high-quality case with a neck strap is included.

Alternative model M-830-KS is the same loupe with a short acrylic base that offers higher magnification when used as a stand-mounted microscope.

Magnification 8x (monocular)
distance 600 mm = 13.5x
25x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 600 mm (loupe)
66 mm (loupe)
Field of view, loupe Distance 1000 meters = 149 meters
Distance 600 mm = 72 mm
Field of view near-focus lens 12 mm (loupe, LS)
Size 130 x 42 mm (magnifier)
213 x 45 mm (magnifier LS)
Weight 170 grams (monocular)
228 grams (magnifier)
Leather case included
Display Upright image
Lens opening 30 mm
Field of view 8.5 °
Relative brightness 14
Exit pupil diameter 3.75 mm
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *