Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the part

How to see the solder joint and the scratch without holding a magnifier over the circuit board

Published 20 November 2026 at 00:57

It’s a familiar situation: a solder joint looks suspicious, but under the lamp the solder glints so much that you can’t tell whether it’s a cold joint or just shiny. With an ordinary magnifier, your head gets in the way of the light, and with a stereo microscope you can barely fit the soldering iron under the objective. The result is a guessed assessment and unnecessary rework, or a fault that slips through.

Dino-Lite EDGE, 1.3 Mpixels, long working distance, measurement function, EDOF, EDR, polarizer

A digital microscope that keeps you at arm’s length

The Dino-Lite EDGE AM4815ZTL is a USB-connected digital microscope with 1.3 megapixels and a working distance of up to 23 centimeters. The image is displayed in real time on the screen, and magnification goes up to approximately 140x according to the manufacturer’s figures. The microscope has eight white LEDs that can be switched on and off, a built-in adjustable polarizer, an IR filter and interchangeable caps. The software also includes a measurement function.

Three features that solve three common problems

The polarizer reduces glare and reflections from shiny surfaces such as solder, polished metal and plastic. What used to be a white blotch becomes a surface where the structure is visible.

EDOF (extended depth of field) takes several images at different focus levels and combines them into a single sharp image. This helps on rough or uneven surfaces, where a single focal plane would otherwise give only a narrow sharp strip.

EDR (extended dynamic range) stacks images with different exposures, so that details in both dark and bright areas are visible at the same time. Please note that EDOF and EDR currently only work under Windows.

Where it’s useful in practice

In electronics production and repair, you can inspect solder joints, component positions and traces on circuit boards while you work, since there is room for both tools and hands under the microscope. In the manufacturing industry, it is used to assess edge chipping on inserts, surface damage, burrs and wear on molding tools. The measurement function means that a scratch or a chipped corner can be documented with dimensions instead of an ”looks okay”. In maintenance and quality, the images are useful documentation for complaints, when you need to show a fault to a supplier or colleague who isn’t standing next to you.

For highly reflective surfaces, such as glass, shiny metal and plastic, there is a coaxial light cap available as an accessory for EDGE models with a long working distance. It removes shadows and makes it easier to see into small holes.

Why it pays off

The cost of a misjudgment is seldom the measurement itself but what follows: scrapped parts, recurring stoppages or a fault that is only discovered at the customer’s. A microscope used right at the workstation lowers the threshold for actually taking a look. Images and measurements can be saved and linked to a case, which saves time on deviation reports. And because several people can view the same screen, the assessment becomes more consistent than when only the person holding the magnifier sees the fault.

If you want to see technical data, a magnification table and the field of view for different magnification levels, you’ll find them on the product page.

Read more

More news

All news