Published 21 November 2026 at 06:16
The dishwasher shows 85 °C on the display, but nobody knows what happened to the plate in the rack. The sensor sits in the tank or in the final rinse, often some distance from the dishware, and the value doesn’t tell you how hot the surface got during the short time the water hit it. Anyone who needs to show that the dishwashing works during a self-inspection or audit needs a measurement taken where it matters.
What DishTemp is
ETI DishTemp is a round, sealed thermometer, 127 mm in diameter and 14 mm high, that is placed in the dish rack like a plate. It follows the surface temperature of a plate throughout the entire program and stores the highest value. When the rack comes out, you read the display. The measuring range is 0 to 90 °C with a resolution of 0.1 °C and an accuracy of ±0.5 °C.
The problems it solves
Test strips give a rough indication and have to be bought again and again. An ordinary probe thermometer doesn’t stay in place in a running machine and doesn’t measure the surface of a plate. DishTemp stays put in the rack, is rated IP66 and therefore withstands water and steam. A single stored value that can be read off at your leisure also reduces the risk of misreadings or made-up figures in the log.
When and why it is used
It is used for routine checks, for example once a day or once a week, as well as after servicing, after replacing a heating element, or when someone suspects that the final rinse isn’t holding temperature. Because the value shows the actual surface temperature, it provides a better basis than the machine’s own display. The thermometer is delivered with a traceable calibration certificate, calibrated at a single point (71 °C).
Three practical examples
Restaurant kitchen: The head chef places DishTemp in a mixed rack during a regular program and notes the peak value in the self-inspection log. If the value is below what the machine manufacturer specifies, you know something needs to be addressed.
Large-scale kitchens and school canteens: There, the machines run long shifts. A check at the start and at the end of the day shows whether the temperature drops when many racks are run in succession.
Food production: Containers and smaller tools that are washed between batches can be checked in the same way, so that the cleaning step in the HACCP plan can be substantiated with a measured value.
Why it pays off
The thermometer is reusable. It is powered by a CR2032 battery with a stated operating time of approximately 5000 hours and requires no consumables. What you save is mainly time and peace of mind: a machine running at too low a temperature cleans poorly, and then the entire dishwashing flow may have to be redone. A fault discovered during a check costs less than one discovered during an inspection.
If you want to be able to show that the dishwasher reaches the right temperature on the dishware itself, DishTemp is a simple and inexpensive way to get the number.