Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the part
Item number 82-M-820-LS

Monocular and Loupe with Near Focus, Specwell M-820-LS. Magnification 25x

3.325 SEK

In stock
Request a quote 82-M-820-LS

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: ,

Other models in the series 8

Description

Specwell M-820-LS Monocular with near-focus lens and short acrylic base. Can be used either as a loupe or as a monocular. Popular for industrial applications in quality control and inspection

When using this product as a monocular, objects can be seen sharply at a minimum working distance of 300 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 9 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is right-way-up. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true-to-life image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Alternative model M-820-KS is the same loupe with a short acrylic base that offers higher magnification when used as a loupe.

Magnification 8x (monocular)
distance 300 mm = 17.5x
25x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 300 mm (loupe)
70 mm (loupe)
Field of view, loupe Distance 1000 meters = 122 meters
Distance 300 mm = 25 mm
Field of view near-focus lens 9 mm (loupe, LS)
Size 91 x 32 mm (loupe)
172 x 45 mm (magnifier)
Weight 76 grams (monocular)
110 grams (magnifier)
Leather case Included
Display Erect image
Aperture 20 mm
Field of view 7 °
Relative brightness 6.2
Exit pupil diameter 2.5 mm

 

Additional information
Product Type

Magnification Range

Specification

Specwell M-820-LS Monocular with near-focus lens and short acrylic base. Can be used either as a loupe or as a monocular. Popular for industrial applications in quality control and inspection

When using this product as a monocular, objects can be seen sharply at a minimum working distance of 300 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 9 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is right-way-up. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true-to-life image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Alternative model M-820-KS is the same loupe with a short acrylic base that offers higher magnification when used as a loupe.

Magnification 8x (monocular)
distance 300 mm = 17.5x
25x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 300 mm (loupe)
70 mm (loupe)
Field of view, loupe Distance 1000 meters = 122 meters
Distance 300 mm = 25 mm
Field of view near-focus lens 9 mm (loupe, LS)
Size 91 x 32 mm (loupe)
172 x 45 mm (magnifier)
Weight 76 grams (monocular)
110 grams (magnifier)
Leather case Included
Display Erect image
Aperture 20 mm
Field of view 7 °
Relative brightness 6.2
Exit pupil diameter 2.5 mm

 

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *