Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrument
Item number 82-M-1020-LS

Monocular and Loupe with Near Focus, Specwell M-1020-LS. Magnification 30x

3.254 SEK

In stock
Request a quote 82-M-1020-LS

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: ,

Other models in the series 5

Description

Specwell M-1020-LS Monocular with near-focus lens and short acrylic base. Can be used either as a loupe or as a monocular. Popular for industrial applications in quality control and inspection.

When using this product as a monocular, objects can be seen sharply at a minimum working distance of 400 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 8 mm and a magnification of 30x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is upright. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true-to-life image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Alternative model M-1020-KS is the same loupe with a short acrylic base that offers higher magnification when used as a loupe.

Magnification 10x (loupe)
distance 400 mm = 18x
30x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 400 mm (loupe)
66 mm (loupe)
Field of view, loupe Distance 1000 meters = 105 meters
Distance 400 mm = 25 mm
Field of view near-focus lens 8 mm (loupe, LS)
Size 106 x 32 mm (loupe)
233 x 45 mm (loupe LS)
Weight 170 grams (monocular)
238 grams (loupe)
Leather case Included
Display Upright image
Aperture 20 mm
Field of view 6 °
Relative brightness 4
Exit pupil diameter 2 mm

 

Additional information
Product Type

Magnification Range

Specification

Specwell M-1020-LS Monocular with near-focus lens and short acrylic base. Can be used either as a loupe or as a monocular. Popular for industrial applications in quality control and inspection.

When using this product as a monocular, objects can be seen sharply at a minimum working distance of 400 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 8 mm and a magnification of 30x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is upright. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true-to-life image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Alternative model M-1020-KS is the same loupe with a short acrylic base that offers higher magnification when used as a loupe.

Magnification 10x (loupe)
distance 400 mm = 18x
30x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 400 mm (loupe)
66 mm (loupe)
Field of view, loupe Distance 1000 meters = 105 meters
Distance 400 mm = 25 mm
Field of view near-focus lens 8 mm (loupe, LS)
Size 106 x 32 mm (loupe)
233 x 45 mm (loupe LS)
Weight 170 grams (monocular)
238 grams (loupe)
Leather case Included
Display Upright image
Aperture 20 mm
Field of view 6 °
Relative brightness 4
Exit pupil diameter 2 mm

 

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *