Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the part
Item number 82-ES-180

Electronic digital caliper, ES series, measuring range 180mm, with 10x magnifying lens

36.145 SEK

In stock
Request a quote 82-ES-180

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 14

Description

82-ES-180 Length Measurement > Electronic length measurement with microscope

The electronic measuring scale has become a standard instrument in the graphic arts industry in many countries, for applications where the exact length of measurements is performed significantly more easily. The hardened guide made of stainless steel is equipped with an inductive readhead. It provides the electronics with information about the instantaneous position of the measuring carriage, making it free from wear, for example, unlike linear ball bearings. The coated, four-lens optical system with a 10x magnification factor makes it possible to move to the exact measuring point. The magnifier has a fine focus for adaptation to your specific correction and is equipped with a hair cross for exact positioning of the measuring carriage. The hard chrome-plated graduations on this plate ensure exact measuring values.

A clever parallax control ensures that the viewing angle is perpendicular to the lens. The easy-to-read display with six-millimeter-high characters shows a maximum resolution of 0.10 millimeter or 0.0005 inch. A fine adjustment is located immediately next to the display. The horizontal leveling screw moves the carriage sensitively to the measuring point. The zero point of the measurement can then be set by pressing the reset button. After moving the carriage to the second measuring point, the result can be read on the display. The system has an RS232 interface. This allows serial transfer of the values to the computer. An RS232-compatible interface cable with optical coupling, as an alternative, is available for data transfer.

Available standard lengths 180 mm / 7 inch
300 mm / 12 Inch
500 mm / 20 Inch
800 mm / 32 Inch
1000 mm / 40 Inch
1300 mm / 52 inch
1500 mm / 60 Inch

Resolution 0.01 mm / 0.0005 in
Repeatability 0.01 mm.

Error range up to 500 mm = 0.03 mm
up to 800 mm = 0.04 mm
up to 1000 mm = 0.05 mm
up to 1300 mm = 0.10 mm
up to 1500 mm = 0.15 mm

LCD display, 3V lithium battery, Lifespan approx. 4000 hours
Temperature range: +10 to +40 °C
RS232 compatible interface
Reticle: Standard or PCB
Wooden transport/storage case included

Download the product datasheet for more information. Lead time is 3 weeks from receipt of order.

Additional information
Product Type

Measuring Scale
Magnification Range

PDF (1)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *