Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableThe vernier caliper that keeps reading correctly when the scale is covered in coolant and chipsThree measuring points give the right bore size when the operator’s hand would otherwise decide the resultVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableThe vernier caliper that keeps reading correctly when the scale is covered in coolant and chipsThree measuring points give the right bore size when the operator’s hand would otherwise decide the result
Item number 82-ESM-25-500

Electronic measuring machine, ESM-25 series, measuring range 500mm, with 25x magnification microscope

46.236 SEK

In stock
Request a quote 82-ESM-25-500

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 14

Description

82-ESM-25-500 Length Measurement > Electronic length measurement with microscope

Electronic length scale with a 25x microscope instead of the standard 10x magnifier (ES series), for more accurate determination of the measuring point. Available in lengths from 180 to 1500 mm. If it is known that very fine positioning is required, the ESM version with a 25x or 50x microscope should preferably be used.

Download the product data sheet for more information.

Available standard lengths 180 mm / 7 in
300 mm / 12 in
500 mm / 20 in
800 mm / 32 in
1000 mm / 40 in
1300 mm / 52 in
1500 mm / 60 in

Resolution 0.01 mm / 0.0005 in
Repeatability 0.01 mm.

Error band up to 500 mm = 0.03 mm
up to 800 mm = 0.04 mm
up to 1000 mm = 0.05 mm
up to 1300 mm = 0.10 mm
up to 1500 mm = 0.15 mm

LCD display, 3V lithium battery, Lifespan approx. 4000 hours
Temperature range: +10 to +40 °C
RS232 compatible interface
Reticle: Standard or PCB
Wooden transport/storage case included

Download the product datasheet for more information. Lead time is 3 weeks from receipt of order.

Additional information
Product Type

Measuring Scale
Magnification Range

PDF (1)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *