Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableThe vernier caliper that keeps reading correctly when the scale is covered in coolant and chipsVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableThe vernier caliper that keeps reading correctly when the scale is covered in coolant and chips
Item number 56-RTR500BW

TandD Receiver Unit/Base Station for 56-RTR500B loggers via wired Ethernet/LAN. Sends data and alarms to cloud/email/FTP. Incl. USB cable

4.324 SEK

In stock

TandD Receiver Unit/Base Station for 56-RTR500B loggers via wired Ethernet/LAN. Sends data and alarms to cloud/email/FTP. Incl. USB cable

Request a quote 56-RTR500BW

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Other models in the series 3

Description

The 56-RTR500BW is TandD’s network base station — the base unit that connects directly to your existing network via wired Ethernet (RJ45) or WiFi, without relying on a PC. Plug in the network cable (or connect to WiFi), power it via PoE or the included AC adapter, register your wireless loggers via the mobile app — and the base unit operates autonomously 24/7, even if you turn off your PC.

Measurement data is collected wirelessly from up to 50 loggers (RTR501B-507B, RTR-574/576) and sent directly via HTTPS to the T&D WebStorage Service cloud (free). Alternatively, you can point the base unit to an internal PC running the T&D Data Server software for intranet installations where the cloud is not used. Alarm notifications are sent via email (up to 4 recipients) or through an external relay output for on-site warning.

Features

  • Network-connected base station — operates without a PC
  • Wired Ethernet (10/100 Mbps, RJ45) or WiFi (802.11 a/b/g/n)
  • WiFi security: WEP 128-bit, WPA-PSK (TKIP), WPA2-PSK (AES)
  • PoE support (IEEE 802.3af) — power via the network cable, one cable is sufficient
  • Collects wirelessly from up to 50 loggers per base unit
  • Wireless range approx. 150 meters line of sight — EU model 869.7–870 MHz
  • Extend range via up to 10 repeaters per group × 4 groups
  • Automatic route selection — the base unit automatically optimizes the wireless path
  • Automatic data transfer via HTTPS to the T&D WebStorage Service cloud
  • Alternative connection to intranet via T&D Data Server software (free, for PC receivers)
  • Alerts via e-mail (4 recipients) and external relay output
  • Settings via the T&D 500B Utility mobile app (Bluetooth) or PC via USB
  • Remote configuration over the cloud

Specification

Compatible loggers 56-RTR501B/502B/503B/505B/507B incl. L models, 56-RTR-574/576 incl. S models, RTR-600 series, as well as discontinued RTR-501/502/503/505/507S, RTR-500 and RTR-601-110/130/E10/E30
Max number of loggers 50 remote units + 10 repeaters × 4 groups
Wireless communication EU: 869.7–870 MHz, RF power 5 mW, range approx. 150 m
Wired network 10 Base-T / 100 Base-TX (RJ45)
Wireless network IEEE 802.11 a/b/g/n with WEP/WPA-PSK/WPA2-PSK
Other interfaces Bluetooth 4.2 BLE (for settings), USB 2.0 Mini-B, optical communication
Download time approx. 2 minutes for 16,000 data points wirelessly (+30 sec per repeater in the chain)
External relay output Photo MOS relay, AC/DC ≤50 V, current ≤0.1 A, ON resistance 35 Ω
Communication protocols HTTP, HTTPS, FTP, SNTP, DHCP, DNS (proxy not supported)
Power supply AC adapter 56-AD-05A4 or 56-AD-05C1 (included), or PoE (IEEE 802.3af)
Dimensions 83 × 102 × 28 mm (excl. antenna) — antenna length 115 mm
Weight approx. 130 g
Operating environment -10 to +60 °C, max 90 % RH non-condensing

Included

  • 56-RTR500BW base unit
  • Antenna 56-CSR-0011 (115 mm)
  • USB Mini-B cable 56-US-15C
  • AC adapter 56-AD-05A4 or 56-AD-05C1 (EU version)
  • Registration code label for T&D WebStorage Service
  • Manual set with warranty certificate

Software and apps — all free

  • T&D 500B Utility — iOS / Android, Bluetooth configuration + remote settings via the cloud
  • T&D WebStorage Service — cloud storage, multi-device access, e-mail alerts
  • T&D Data Server — Windows, for intranet installations without cloud services
  • T&D Graph — Windows, advanced graph analysis
  • Communication DLL + XML format — free documentation for integration

Applications

The 56-RTR500BW is chosen when you require an autonomous base unit connected directly to the company network — laboratories, hospitals, pharmaceutical warehouses, museums, greenhouses, data centers, food production. PoE support makes installation easy (one cable = power + network), and the lack of PC dependency means the base unit continues to collect data even when all workstations are shut down. For installations without a network but with access to a PC, see 56-RTR500BC. For locations without both a PC and a network, see 56-RTR500BM (4G).

Additional information
Product Type

Communication

Wired Ethernet, Wireless Long Range