Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableThe vernier caliper that keeps reading correctly when the scale is covered in coolant and chipsThree measuring points give the right bore size when the operator’s hand would otherwise decide the resultVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableThe vernier caliper that keeps reading correctly when the scale is covered in coolant and chipsThree measuring points give the right bore size when the operator’s hand would otherwise decide the result
Item number 56-TR43A

TandD Bluetooth Logger for Temperature and Humidity with External Sensors. 0–55 °C, 10–95 %RH. Measurement Data via Mobile App

1.966 SEK

In stock

TandD Bluetooth logger for temperature and humidity with external sensors. 0–55 °C, 10–95 %RH. Measurement data via mobile app

Request a quote 56-TR43A

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Other models in the series 16

Description

The 56-TR43A is a Bluetooth logger for combined temperature and humidity — it uses the included external T/RH sensor THB3001 on a cable, allowing you to place the sensor exactly where the measurement is needed while the electronics remain in a safe location. The measuring range of 0–55 °C and 10–95 %RH covers most indoor environments.

Readings are transmitted directly to your mobile phone or tablet via Bluetooth using the T&D Thermo app — display curves, upload to the T&D WebStorage cloud, or create reports with the TR4 Report app. For higher precision and a wider measuring range (±2.5 %RH), see the 56-RTR507B (wireless) or consider a SHA-3151 high-precision sensor.

Features

  • External T/RH sensor THB3001 included
  • Temperature measuring range: 0 to +55 °C
  • Humidity measuring range: 10 to 95 %RH
  • Accuracy ±0.5 °C / ±5 %RH (at 25 °C, 50 %RH)
  • Resolution 0.1 °C / 1 %RH
  • Response time approx. 11 minutes (90 %)
  • Bluetooth 4.2 Low Energy — direct to mobile phone/tablet
  • 8,000 data point memory (combined temp + RH)
  • 15 fixed logging intervals: 1–60 sec or 1–60 min
  • Battery life approx. 1 year on one LS14250 lithium cell
  • Built-in LCD with alternating display of temperature and RH
  • Report generation via the TR4 Report app

Specification

Measurement channels Temperature 1 channel (thermistor) + Humidity 1 channel (polymer) — external, on cable
Measuring range 0 to +55 °C / 10 to 95 %RH
Accuracy ±0.5 °C / ±5 %RH (at 25 °C, 50 %RH)
Resolution 0.1 °C / 1 %RH
Response time (90 %) approx. 11 minutes
Logging capacity 8,000 data points (combined temp + RH)
Logging mode Endless or One Time
Communication Bluetooth 4.2 BLE
Download time approx. 30 seconds (full memory)
Protection class IP64 on the logger (the T/RH probe is not water-resistant)
Power supply Lithium battery LS14250 × 1 (included)
Battery life approx. 1 year
Dimensions 62 × 47 × 19 mm (excl. protruding parts and probe)
Weight approx. 50 g
Operating environment -40 to +80 °C (during wireless transmission: -25 to +80 °C)

Included accessories

  • 56-TR43A logger
  • External T/RH probe 56-THB3001
  • 1 × Lithium battery LS14250
  • Registration code label for T&D WebStorage Service
  • Strap for hanging
  • Manual set with warranty certificate

Applications

The 56-TR43A is suitable for daily T/RH measurement needs in indoor environments: food storage, wine cellars, greenhouses, museums and archives, pharmaceutical warehouses, classrooms, offices, and data centers. The direct-to-mobile Bluetooth connection makes it ideal for portable measurement tasks — transport monitoring, audit rounds, and quality control. For higher accuracy (±2.5 %RH), see the 56-RTR507B/507BL (wireless with base unit).

Additional information
Product Type

Measures

% Relative Humidity, Temperature

Communication

Wireless Bluetooth