Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrument
Item number 82-OJ-60X

Replacement Lenses for Peak Lupe Microscope

1.458 SEK

In stock
Request a quote 82-OJ-60X

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 7

Description

82-OJ-60X Accessories > Eyepieces and lenses for Peak-Lupe and Cellcheck

The Peak Lupe 2034 and 2054 series microscopes offer the ability to change the magnification by changing the lens. Four additional recesses are already included in the standard transport cases for the safe transport of replacement lenses. The lenses feature a screw thread for extremely easy replacement.

However, the measuring scales require special attention. For example, if a microscope with a magnification of 100x is used with a 0.01 mm scale, the reading will be incorrect when the lens is changed. Therefore, extra lenses should be ordered together with the corresponding eyepieces. It is not necessary to change the eyepiece for simple visual inspection.

Select the magnification to order the correct lens. 7 lenses are available:

Lens Magnification
2x 20x
4x 40x
6x 60x
10x 100x
15x 150x
20x 200x
30x 300x
Additional information
Product Type

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *