Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the part
Item number 64-831055

Ceramic Gauge Blocks Select, per piece, in sizes 1.001-1.009 mm in steps of 0.001 mm, ISO 3650/1

751 SEK

In stock

Precision-machined measurement reference with a 1.001 mm dimension, compliant with ISO 3650/1 standard. Manufactured from high-quality ceramic for excellent dimensional stability and high wear resistance. Ideal for calibrating and verifying measuring instruments in industrial environments where precise measurements are critical. Supplied with a calibration certificate.

Request a quote 64-831055

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

CerGauge Bl Gauge Block 1.001mm ISO 3650/1 64-831055

This high-precision gauge block is manufactured to provide exact reference dimensions in calibration and measurement applications. With a nominal length of 1.001mm, model 64-831055 offers exceptional dimensional stability and accuracy in accordance with the ISO 3650/1 standard. The gauge block’s high reliability makes it an indispensable tool for quality control and precision measurement in industry and research.

The gauge block is made of high-quality ceramic composite (CerGauge Bl), providing superior resistance to wear, corrosion, and temperature variations compared to conventional materials. It meets the ISO 3650/1 standard for tolerance class 1, guaranteeing extremely accurate measurements with minimal deviation. Each gauge block undergoes rigorous quality testing to ensure it meets the strict requirements for dimensional accuracy.

  • Manufactured according to the ISO 3650/1 standard for highest precision
  • Made of ceramic composite for superior dimensional stability
  • Exact nominal length of 1.001mm with tolerances according to class 1
  • Corrosion-resistant and temperature-stable for long-term use
  • Supplied with a calibration certificate confirming traceability
  • Low thermal expansion coefficient minimizes temperature influence on measurement results
Model number 64-831055
Nominal length 1.001mm
Tolerance class ISO 3650/1 (Class 1)
Material CerGauge Bl ceramic composite
Surface finish Highly polished
Calibration Supplied with traceable calibration certificate

Applications:

  • Calibration of precision measuring instruments
  • Quality control in the manufacturing industry
  • Metrology and dimensional inspection
  • Reference standard for measurement laboratories
  • Quality assurance in industrial manufacturing processes
  • Research and development requiring high-precision measurements

This 1.001mm gauge block provides the level of precision required for the most demanding metrology and calibration tasks, ensuring accurate and consistent measurement results in all situations where precision is critical.

Additional information
Weight 0,007 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *