Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%How to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrument
Item number 64-906733

Measuring inserts for Whitworth threads, 55° flank angle, 32-24 threads per inch, per pair, for thread micrometer

340 SEK

In stock

High-quality measuring inserts designed for optimal performance in various applications. These reliable components ensure accurate results and long-lasting durability. Perfect for professional use where precision and quality are critical. Compatible with standard systems for seamless integration into existing equipment.

Request a quote 64-906733

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Measuring insert for Whitworth threads, 55° flank angle is a thread micrometer accessory — either a setting standard (master gauge for zero-calibration of thread micrometers) or a measuring insert (the contact surface of the micrometer itself matched to the thread form). Both are essential for traceable thread pitch measurement on screws and nuts.

Setting standards are pre-cut threads at known pitch diameters — place it in the micrometer, zero it, then measure the workpiece thread. Measuring inserts have V-shaped or pointed contact surfaces that seat into the thread profile so the micrometer reads the pitch diameter directly. Hardened, ground surfaces; matched to specific thread pitch values.

Usage: for setting standards, place in the micrometer, read the zero value, adjust the micrometer if necessary; for measuring inserts, swap inserts to match the thread pitch and measure over the thread pitch line. Both require matching to a specific thread pitch and tolerance class.

Common applications: calibration of thread micrometers in calibration laboratories, traceable thread QC in manufacturing workshops, master-gauge-based zero-verification chains, and educational applications for thread form instruction.

Features

  • Measuring insert for Whitworth threads, 55° flank angle
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Screw thread micrometers – Measuring inserts
Article number 64-906733

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and periodic verification — typically 12-month intervals for production floors, 6-month for high-volume chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,111 kg
Threads Per Inch

32-24

Klämaxel

ø 5 mm

Variants

Variant Properties

Specification

Measuring insert for Whitworth threads, 55° flank angle is a thread micrometer accessory — either a setting standard (master gauge for zero-calibration of thread micrometers) or a measuring insert (the contact surface of the micrometer itself matched to the thread form). Both are essential for traceable thread pitch measurement on screws and nuts.

Setting standards are pre-cut threads at known pitch diameters — place it in the micrometer, zero it, then measure the workpiece thread. Measuring inserts have V-shaped or pointed contact surfaces that seat into the thread profile so the micrometer reads the pitch diameter directly. Hardened, ground surfaces; matched to specific thread pitch values.

Usage: for setting standards, place in the micrometer, read the zero value, adjust the micrometer if necessary; for measuring inserts, swap inserts to match the thread pitch and measure over the thread pitch line. Both require matching to a specific thread pitch and tolerance class.

Common applications: calibration of thread micrometers in calibration laboratories, traceable thread QC in manufacturing workshops, master-gauge-based zero-verification chains, and educational applications for thread form instruction.

Features

  • Measuring insert for Whitworth threads, 55° flank angle
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Screw thread micrometers – Measuring inserts
Article number 64-906733

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and periodic verification — typically 12-month intervals for production floors, 6-month for high-volume chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *