Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceable
Item number 65-120129135

0-12.5 mm digital gauge, wireless, 0.1 m resolution, microcomputer, 0.001 mm resolution

5.644 SEK

In stock
Request a quote 65-120129135

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Digital measuring instrument with measuring range 0-12.5 mm, 0.0001 mm resolution, wireless data output, touchscreen, extensive software functions

Exact reading of the measured values with a resolution of 0.0001 mm. High measurement reliability with 0.003 mm accuracy. A microcomputer with a touchscreen is installed for the display with dial indicator, via which the software functions can be used. The measuring instrument has an IP 54 protection rating. Dust- and splash-proof. Handmade meter for high precision. The unit uses a rechargeable battery. This eliminates the need for constant battery replacement. Delivered with a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes measuring instruments to the next level. The system is equipped with a touchscreen and many software functions, leaving no room for compromise.

The display features a clearly readable touchscreen. An easy-to-use menu ensures simple menu navigation. The internal memory ensures that up to 100 measured values can be stored. Statistics can be used to read off min., max. and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color (green for GO / red for NoGO). Reading of MIN/MAX values. Calculation formulas can be entered via the formula mode and evaluated thereafter. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. For certain measurements, it is necessary to include a mathematical error correction, which is also possible with the microcomputer system. The display can be rotated in all directions, depending on the working direction. The calibration date can be integrated into the software; an external date search is not necessary. The wireless data transfer can be triggered via a timer, touchscreen, or button.

For measuring instruments with the MICS system, there is free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Preset function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 120129135
  • Product: dial indicator
  • Measuring range: 0-12.5
  • Resolution: 0.0001 mm
  • Data output: Wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.003 mm
  • Protection class: IP 54
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • rechargeable battery
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *