Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceable
Item number 65-120129137

0-12.5 mm digital gauge, wireless, 0.1 m resolution, microcomputer, 0.001 mm resolution

6.965 SEK

In stock
Request a quote 65-120129137

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Digital measuring instrument with measuring range 0-12.5 mm, 0.0001 mm resolution, wireless data transmission, touchscreen, extensive software functions

Exact reading of measured values with a resolution of 0.0001 mm. High measurement reliability with 0.002 mm accuracy. Instead of a standard screen, a microcomputer with a touchscreen is installed. Extensive software functions are available. The measuring instrument has IP 54 protection. Dust and splash-proof. Handmade measuring jaws ensure precise accuracy. The unit has a rechargeable battery. This eliminates the need for constant battery replacement. Delivery includes a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s innovative computer-aided MICS system takes measuring instruments to the next level. The system is equipped with a touchscreen and many software functions, leaving little to be desired.

The display is via a touchscreen. An easy-to-use menu ensures simple menu navigation. The internal memory ensures that up to 100 measured values can be stored. Statistics can be used to read off min., max. and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color (green for GO / red for NoGO). Reading of MIN/MAX values. Calculation formulas can be entered via the formula mode and evaluated thereafter. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. For certain measurements, it is necessary to include a mathematical error correction, which is also possible with the microcomputer system. Depending on the working direction, the display can be rotated. The calibration date can be integrated into the software; an external date search is not necessary. The wireless data transmission can be triggered via a timer, touchscreen, or button.

Measuring instruments with the MICS system are delivered with free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software features in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Pre-setting function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Turn off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 120129137
  • Product: dial indicator
  • Measuring range: 0-12.5
  • Resolution: 0.0001 mm
  • Data output: Wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.002 mm
  • Protection class: IP 54
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *