Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature check that is no longer written on paper an hour after the measurementThe dishwasher’s display temperature doesn’t tell you how hot the plate actually gotHow to see the solder joint and the scratch without holding a magnifier over the circuit boardThe cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the part
Item number 65-120129253L

0-25.4 mm Digital meter, wireless, 0.1 m resolution, microcomputer with external button (2 m cable), 0

9.721 SEK

In stock
Request a quote 65-120129253L

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Digital measuring instrument with measuring range 0-25.4 mm, 0.0001 mm resolution, wireless data output, touchscreen, innovative MICS functions

Accurate reading of measurement results with a resolution of 0.0001 mm. High measurement reliability with 0.0074 mm accuracy. A microcomputer with a touchscreen is installed for the display with dial indicator, through which the software functions can be used. A handcrafted measuring tip ensures good precision. The unit has a rechargeable battery. This eliminates the need for constant battery replacement. Supplied with a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes measuring equipment to the next level. The system is equipped with a touchscreen and many software functions, leaving no room for alternatives.

The display is via a touchscreen. A user-friendly menu ensures simple menu navigation. The internal memory ensures that up to 100 measured values can be stored. Statistics can be used to retrieve min, max, and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color. Reading of MIN/MAX values. The form mode makes it possible to enter calculation formulas with corresponding evaluation. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS Microcomputer System allows input of mathematical error corrections. Depending on the working direction, the display can be rotated. The calibration date can be stored in the software, so you do not always need to look at the computer when a new calibration must be performed. The wireless data transfer can be triggered via a timer, touchscreen, or button.

For measuring tools with the MICS system, there is free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

The MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Preset function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Pol battery

Technical data:

  • Manufacturer: Microtech
  • Product: dial indicator
  • Measuring range: 0-25.4
  • Resolution: 0.0001 mm
  • Data output: wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.0074 mm
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *