Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceableVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The cold room was too warm last night, but nobody can show for how longWhy Two Operators Get Different Readings in the Same Bore, and How to Eliminate the DifferenceThe scratch is visible to the eye but not in the report: how to measure directly on the microscope imageWhy a two-point measurement of a bore often shows the wrong diameter, and how a three-point micrometer solves itThree seconds instead of half a minute: how core temperature checks become a routine that actually gets doneA Hundred Bearing Seats per Shift: Read the Deviation Directly Instead of Calculating the DiameterThe hole measures correctly at the mouth but is tapered further in: how to find the fault without cutting up the partOne Second Is Enough to Tell Whether the Core Temperature PassesThree contact points give a bore measurement that doesn’t depend on who is holding the instrumentWhen the measurement has to be taken from an image: how automatic magnification reading makes microscope measurement traceable
Item number 64-828573

Tungsten carbide gauge blocks Select, 30 mm, ISO 3650/0

2.909 SEK

In stock

Precision measuring tool in the form of a tolerance gauge, manufactured from tungsten carbide (TC) in accordance with the ISO 3650/0 standard. This 30.00 mm gauge block is used for precise calibration and measurement in the workshop industry. Ideal for quality control and as a reference gauge in precision work where the highest accuracy is required.

Request a quote 64-828573

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Measuring Calibration Bar 30.00mm ISO3650/0 TC 64-828573

This 30.00mm measuring calibration bar is manufactured in accordance with the strict ISO3650/0 standard for maximum precision in metrology and quality control. With an exact dimension of 30.00mm, this calibration bar provides a reliable reference point for calibrating measuring instruments, ensuring that your measurement results are always reliable and accurate. Made of carbide (TC), the bar offers exceptional wear resistance and long-term dimensional stability, making it an ideal tool for frequent use in both workshop environments and measurement laboratories.

The calibration bar meets the rigorous tolerance requirements of the ISO3650/0 standard, guaranteeing the highest accuracy and repeatability. Its precision-machined surface has been polished to an extremely fine finish to minimize measurement deviations. The carbide construction (TC) provides superior resistance to wear, corrosion, and dimensional changes over time, making this calibration bar an investment in long-term measurement accuracy.

  • Manufactured according to the ISO3650/0 standard for highest precision
  • Exact dimension of 30.00mm for accurate reference measurements
  • Made of premium carbide (TC) for superior wear resistance
  • Highly polished surface finish for minimal measurement deviations
  • Dimensionally stable even with frequent use
  • Supplied with a calibration certificate for traceability
Model Number 64-828573
Dimension 30.00mm
Standard ISO3650/0
Material Carbide (TC)
Tolerance Class 0
Type Gauge Block

Applications:

  • Calibration of precision measuring instruments
  • Setting of comparators and micrometers
  • Quality control in the manufacturing industry
  • Verification of measurement systems in metrology labs
  • Precision setup of production equipment

This 30.00mm measuring calibration bar represents a perfect balance between precision and durability, making it an indispensable tool for anyone requiring reliable and accurate measurements in their professional operations.

Additional information
Weight 0,132 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *